In Plant Receiving Systems
Tripper Conveyor
The Tripper Conveyor, in 12-, 18-, 24-, 30-, 36-and 42- inch belt widths, is designed to load individual bins by moving over the top of bins on the Layco Stationary Conveyor. The flow-through tripper is operated manually to discharge product to the left, right or the end. The Tripper Conveyor is available in capacities from 60 to 800 TPH.
Specifications
| Standard Features | |
| 12 gauge 304 stainless or 10 gauge mild steel | |
| Holz rubber lagged drive roller | |
| 6" diameter turn-clean end rollers | |
| Return slides | |
| 18" PVC crescent top belt - 120# | |
| Stainless steel splice | |
| Bolt-together construction in 10' sections for ease of installation | |
| Gearbox or jackshaft option for drive | |
| 400 FPM belt speed | |
| Drive roller shaft 1 1/4" | |
| Take-up roller shaft 1 1/4" | |
| Greasable bearings |
| Tripper Conveyor | |
| Standard Features Plus: | |
| 12-gauge 304 stainless steel | |
| Heavy-duty 1 1/4" bearings on rollers | |
| 1" diameter greasable bearings on trolley wheels | |
| 4" diameter solid steel trolley wheels to shuttle tripper | |
| Material will discharge on left or right side of conveyor or will discharge from center for filling end bay | |
| Dimensions: | |
| Height from conveyor side | 27" |
| Length | 89 1/4" |
| Width | 29 1/2" |
| Overall height from bottom of conveyor frame | 38" |
| Large 10" X 16" chutes @ 45 degree angle from Tripper sides | |
| Note: | |
| 12" frames: subtract 6&qu/t; from all width dimensions | |
| 24" frames: Add 6" to all width dimensions | |
| 250 to 400 Ton Per Hour | |
| Casing | 28" wide X 23 7/8" deep, 10 gauge 304 stainless steel |
| Chain | Double stran 6844M offset steel knuckle chain with hardened stainless steel pins and cotters with G-19 attachments both sides every 3nd flight - 6" pitch chain |
| Head Sprocket | 9 tooth - cast iron with chilled rim 17.51 pitch diameter - 210 ft./main. maximum |
| Tail Sprocket | 9 tooth - cast iron with chilled rim 11.70 pitch diameter |
| Conveying Flights | 3/8" thick steel with bolt on 5/8" thick UHMW plastic paddles |
| Head Bearings | Tapered roller bearings Industrial pillow blocks |
| Tail Bearings | Spherical roller bearings Industrial pillow blocks |
| Motor | 1.15 service factor T.E.F.C. - T-frame motors |
| Gearbox | Heavy duty industrial grade gearboxes with tapered lock bushing kit |
| V-Belts & Sheave Set | Sheaves with bushing kits and belts as needed |
| Take Ups | Twin 1" diameter stainless rods |
12285 E. Main St - P.O. Box 238 - Marshall, IL 62441 - USA
Phone (217) 826-6352 - Fax (217)826-8551
E-MAIL: layco@yargus.com
